Raising The Machine - Toro Z400 Series Z Master Setup Instructions

Step
12
No parts needed
13
No parts needed
Key
Operator's Manual
14
Engine Owner's Manual
Parts Catalog
Safety video
Registration card
Step
1

Raising the Machine

Parts Needed for This Step
None
Procedure
1. Remove the wheel
nuts from both sides of
the vehicle.
2. Remove the right
angle retaining plate
from the crate and the
wheel hub.
2
Description
m-6918
Qty.
– Preparing the side discharge chute
– Checking the machine before delivery
2
1
1
Delivering the machine to the customer
1
1
1
3. Raise the back of the machine up and support it
with jack stands.
Use
m-6919