Toro Z400 Series Z Master Setup Instructions page 10

Step
13
Checking the Machine before Delivering It to the Customer
Parts Needed for This Step
None
Procedure
Before delivering the machine to the customer, ensure that you perform or have performed the procedures listed
in the following table and initial each when finished. Refer to the Operator's Manual for instructions on performing
these procedures.
Initial
Check the tire pressure.
Check the level of the mower.
Check that all mower spindles are greased.
Check the engine oil level.
Check the hydraulic fluid level.
On liquid cooled machines, check the level of the coolant.
Check the adjustment of the parking brake.
Ensure that the machine tracks (drives) correctly.
Check the safety interlock system.
Ensure that the PTO works.
Check all fasteners you installed to ensure that they are tight.
When you finish setting up the machine, sign and date in the space provided below:
Signature:
10
Check Procedure
Date: