Table of Contents
Advertisement
2
Checking the Tire Pressure
No Parts Required
Procedure
The tires are overinflated for shipping. Therefore, release
some of the air to reduce the pressure. Check the tire
pressure; refer to
Checking the Tire Pressure (page
3
Checking the Fluid Levels
No Parts Required
Procedure
1. Check the level of the hydraulic fluid before starting
the engine; refer to
(page
42).
2. Check the level of the engine oil before starting the
engine; refer to
Checking the Engine-Oil Level (page
32).
3. Check the cooling system before starting the engine;
refer to
Checking the Cooling System (page
36).
Checking the Hydraulic System
37).
Product Overview
Controls
Become familiar with all the controls before you start the
engine and operate the machine.
Traction Pedal
The traction pedal
(Figure
operation. Press the top of the pedal to move forward and the
bottom to move rearward. Ground speed depends on how
far you press the pedal. For no load, maximum ground speed,
fully press the pedal while the throttle is in the
To stop the machine, reduce your foot pressure on the
traction pedal and allow the pedal to return to the
position.
1. Parking brake
2. Brake pedal
3. Tilt-steering pedal
Mow-Speed Limiter
The mow-speed limiter
the machine when you flip it forward.
Brake Pedal
Use the brake pedal in conjunction with the brake-pedal latch
to engage and disengage the parking brake
the machine, release the traction pedal and allow it to return
to the
position. The brake can assist in stopping in
CENTER
an emergency situation.
Parking Brake
To engage the parking brake, push down on the brake pedal
and press the top forward to latch it
10
4) controls the forward and reverse
FAST
Figure 4
4. Traction pedal
5. Mow-speed limiter
(Figure
4) limits the traction speed of
(Figure
(Figure
4). To release the
position.
CENTER
4). To stop
Advertisement
Table of Contents
