Toro 31200 Operator's Manual page 12

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
4
1. Indicator light
2. Right button
•
Left button, menu access/back button—press this button
to access the InfoCenter menus. You can use it to back
out of any menu you are currently using.
•
Middle button—use this button to scroll down menus.
•
Right button—use this button to open a menu where a
right arrow indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button will be labeled
with an icon displaying its current function.
(Figure 7). There
g020650
2
3
Figure 7
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
12
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Fast
Slow
Stationary regeneration required
Glow plugs are active
AC
2-wheel steer
4-wheel steer
Operator must sit in seat
Parking brake indicator—indicates
when the parking brake is set
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
PTO is engaged
Denied or not allowed
Engine start
Stop or shutdown
Engine
Key switch
PIN passcode
CAN bus