Safety And Instructional Decals - Toro 30807 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Crushing hazard of hand—keep your hands a safe distance
away.
1. Warning—read the Operator's Manual.
2. To start the engine, sit on the seat and rotate the ignition
key to On/Preheat until the glow plug indicator light goes
out. Rotate the key to start and disengage the parking
brake. Read the Operator's Manual for further instructions.
3. To stop the engine, disengage the cutting units, rotate the
ignition key to Off, and remove the key. Engage the parking
brake. Read the Operator's Manual for further instructions.
94-3353
99-3558
(CE only)
100-4837
1. Explosion hazard—wear eye protection.
2. Caustic liquid/chemical burn hazard—to perform first aid,
flush with water.
3. Fire hazard—no fire, open flames, or smoking.
4. Poison hazard—keep children a safe distance from the
battery.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115-149 N-m (85-110 ft-lb).
*This safety decal includes a slope warning required on the machine for compliance to
the European Lawn Mower Safety Standard EN836:1997. The conservative maximum
slope angles indicated for operation of this machine are prescribed by and required by
1. Tipping hazard—do not drive on slopes greater than 15
degrees.
1. Cutting/dismemberment—hazard, fan-stay away from
moving parts.
8
93-7276
93-7818
107-7801
this standard.
93-6681
(CE Only)