Greasing The Boom Hinges - Toro 41177 Multi-Pro 1250 Operator's Manual

Figure 38
Pump drive, four, one each side
1. Grease point
Figure 39
Drive axel at engine, ve, one each side and slip joint
1. Grease point
Figure 40
Drive axel at transmission
1. Grease point
Figure 41
Pump (Do not over grease)
1. Grease point
Figure 42
1. Grease point

Greasing the Boom Hinges

Important: If the boom hinge is washed
with water, all water and debris must be
cleared from the hinge assembly and fresh
grease must be applied.
Grease Type: No. 2 general-purpose lithium base
grease.
1. Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing at
each fitting Figure 43.
43