Toro 03540 Reelmaster 5200-D Operator's Manual page 43

Figure 43
• 5 fittings on the lift arm pivots (Figure 44)
• 1 fitting on the drive shaft clutch (Figure 44)
Figure 44
• 2 fittings on the rear axle tie rod (Figure 45)
• 2 fittings on the steering cylinder ball joints
(Figure 45)
• 2 fittings on the axle steering pivots (Figure 45)
• 2 fittings on the rear axle pivot (Figure 45)
Figure 45
• 1 fitting on the traction control linkage at the
transmission (Figure 46)
• 1 fitting on the drive shaft support bearing
(Figure 46)
• 3 fittings on the rear axle drive shaft (Figure 46)
Figure 46
• 1 fitting on the brake pedal (Figure 47)
Figure 47
• 5 fittings on the lift cylinders (Figure 48)
43