Installing Rear Weights - Toro 03540 Reelmaster 5200-D Operator's Manual

Step
8

Installing Rear Weights

Parts needed for this step:
Varies Rear weights (size varies with conguration).
Procedure
The Reelmaster 5200-D & 5400-D Traction Units comply with CEN standard EN 836:1997, ISO
standard 5395:1990, and ANSI B71.4-1999 Standards when equipped with rear weights and 90 lb of
calcium chloride ballast is added to rear wheels. Use the chart below to determine the combinations of
weights required for your configuration. Order parts from your local Authorized Toro Distributor.
Traction Unit
Conguration
2wd Traction Unit
with ROPS w/o
baskets
2wd Traction Unit
with ROPS with
baskets
2wd Traction Unit
w/o ROPS w/o
baskets
2wd Traction Unit
w/o ROPS with
baskets
4wd Traction Unit
with ROPS w/o
baskets
4wd Traction Unit
with ROPS with
baskets
Important: If a puncture occurs in a tire with calcium chloride, remove the machine from
the turf area as quickly as possible. To prevent possible damage to the turf, immediately soak
the affected area with water.
Rear Weight Weight Part
Required Number
291 lb (132 kg)
358 lb (162 kg)
157 lb (71 kg)
224 lb (102 kg)
157 lb (71 kg)
249 lb (113) 75-6690 and 98-9780
Weight
Description
75-6690 Rear Weight Kit
75-6690 Rear Weight Kit
75-6690
Rear Weight Kit
75-6690
Rear Weight Kit
75-6690
Rear Weight Kit
Rear Weight Kit and
Rear Weight Kit—25 lb
20
Qty
3
4
1
2
1
2 and 1