ENGINE AND EMISSION CONTROL SYSTEM (H25 ENGINE) 6E2-27
7) Remove delivery pipes (1) (right and left) from intake manifold.
8) Remove fuel injector(s).
Inspection
WARNING:
As fuel is injected in this inspection, perform in a well venti-
lated area and away from open flames.
Use special care to prevent sparking when connecting and
disconnecting test lead to and from battery.
1) Install injector (1) and fuel pressure regulator (2) to special tool
(injector checking tool).
NOTE:
Remove grommet from injector, then install injector to spe-
cial tool and tighten bolts by hand.
Special Tool
(A): 09912-58421
2) Connect special tools (hoses and attachment) to pipes of ve-
hicle.
Special Tool
(B): 09912-58431
3) Connect special tool (test lead) to injector.
Special Tool
(C): 09930-88521