1. Oil pan
2. Oil pump strainer
3. Seal
4. Drain plug gasket
5. Drain plug
6. CKP sensor
3. Oil pan
OIL PAN AND OIL PUMP STRAINER
REMOVAL
1) Raise vehicle.
2) Remove front differential housing (1) with differential (2), refer-
ring to "DIFFERENTIAL" section.
3) Disconnect CKP sensor coupler and remove CKP sensor by re-
moving its bolt. (if equipped)
4) Drain engine oil by removing drain plug (2).
1. Oil pan
5) Remove clutch housing (torque converter housing for A/T) low-
er plate (1).
ENGINE MECHANICAL (G16 ENGINE) 6A1-23