9) Disconnect following hoses:
D Canister purge hose from EVAP canister purge valve
D Radiator outlet hose from inlet pipe
D Brake booster hose from intake manifold
D Vacuum hose from intake manifold
D Heater inlet and outlet hose from pipe
D Fuel feed hose and return hose from each pipe
D A/T fluid hose clamp from bracket
10) Disconnect accelerator cable and A/T throttle cable (if
equipped) from throttle body and each clamp.
11) With hose connected, detach A/C compressor and/or power
steering pump with bracket from cylinder block if equipped.
12) Loosen bolts fastening cylinder block and transmission.
13) Hoist vehicle.
14) Drain engine oil if necessary.
15) Remove exhaust pipe bolts or exhaust pipe.
ENGINE MECHANICAL (G16 ENGINE) 6A1-65