Electronic Control System - Suzuki 2000 Grand Vitara SQ625 Service Manual

1. Cover
2. Clip

ELECTRONIC CONTROL SYSTEM

ENGINE CONTROL MODULE (ECM)/POWERTRAIN
CONTROL MODULE (PCM)
CAUTION:
As ECM/PCM consists of precision parts, be careful not to
expose it to excessive shock.
Removal
1) Disconnect battery negative cable from battery.
2) Disable air bag system (if equipped) referring to "Disabling the
Air Bag System" in "Air Bag System" section.
3) Remove ECM/PCM cover from bracket.
1
2
4) Disconnect connectors from ECM/PCM.
5) Remove ECM/PCM with bracket.
Installation
1) Install ECM/PCM with bracket to vehicle.
2) Connect connectors to ECM/PCM securely.
3) Install ECM/PCM cover to bracket.
4) Enable air bag system (if equipped) referring to "Enabling Air
Bag System" in "Air Bag System" section.
5) Connect negative cable to battery.
ENGINE AND EMISSION CONTROL SYSTEM (G16 / J20 ENGINES) 6E1-31