Oil Pan And Oil Pump Strainer - Suzuki 2000 Grand Vitara SQ625 Service Manual

1. Upper oil pan
2. Lower oil pan
3. Oil pump strainer
4. Bracket
5. O-ring
6. Drain plug
7. Gasket
1. Differential housing
2. Differential
3. Oil pan
1. Upper oil pan
2. Lower oil pan
3. Drain plug

OIL PAN AND OIL PUMP STRAINER

REMOVAL
1) Remove oil level gauge guide.
2) Raise vehicle and remove both front wheels.
3) Remove rack and pinion assembly.
Refer to Section 3B1 for removal.
4) Remove front differential housing with differential from chassis
if equipped.
Refer to Section 7E for removal.
5) Drain engine oil by removing drain plug.
6) Remove lower oil pan from upper oil pan.
7) Remove oil strainer bracket.
8) Detach radiator outlet pipe from upper oil pan.
9) Remove upper oil pan according to following procedure.
Lower upper oil pan until it stops by way of cross member and
oil pump strainer and keep it at that position temporarily.
With wrench inserted between upper oil pan and lower crank-
case, and oil pump strainer mounting bolt removed, remove oil
pump strainer.
Then remove upper oil pan from temporarily supported position.
ENGINE MECHANICAL (H25 ENGINE) 6A2-19