Samsung SRP-275 Operator's Manual page 79

CHAPTER 5
CONTROL COMMANDS LIST
LF
Name] Line feed
[Format] ASCII LF
Hex 0A
Decimal 10
[Range] ------
[Default] Set line feed to 1/6 inch
[Description] After printing data in the line buffer, paper is fed according to the currently
set line feed amount.
CR
[Name] Carriage return (line feed)
[Format] ASCII CR
Hex 0D
Decimal 13
[Range] ------
[Default] Set line feed to 1/6 inch
[Description] Specifies the function according to the memory switch value.
MSW
Condition 1
Condition 2
Condition 3 Executes only printing, with no paper feed.
5-86
Function
Ignored
Same as the LF code
ESC a n
[Name] Feed paper n lines
[Format] ASCII ESC a
Hex 1B 61
Decimal 27 97
1 ≤ n ≤ 127
[Range]
[Default] ------
[Description] After printing data in the line buffer, paper is fed according to the currently
set line feed amount x n. Line feed amount is unaffected even if double-high
characters and double-high/wide characters exist in the same line.
ESC 0
[Name] Set line feed to 1/8 inch
[Format] ASCII ESC 0
Hex 1B 30
Decimal 27 48
[Range] ------
[Default] 1/6 inch
[Description] Sets subsequent line feeds to 1/8 inch.
n
n
n
5-87