Samsung SRP-275 Operator's Manual page 71

CHAPTER 5
CONTROL COMMANDS LIST
[Note] Only if ESC 4 is selected or paper stop printing sensor is not selected.
Basic ASB status is 4-byte configuration [first byte - fourth byte].
The status to be transmitted are as follows:
First byte (printer information)
Bit Off/On Hex
0 Off 00
1 Off 00
Off 00
2
On 04
Off 00
3
On 08
4 On 10
Off 00
5
On 20
Off 00
6
On 40
7 Off 00
Second byte (printer information)
Bit Off/On Hex
0 Off 00
1 Off 00
Off 00
2
On 04
Off 00
3
On 08
4 Off 00
Off 00
5
On 20
Off 00
6
On 40
7 Off 00
- If mechanical error (bit 2) or auto-cutter error (bit 3) occurs due to paper
jams or the like, it is possible to recover by correcting a cause of the error
and executing DLE ENQ.
- If an unrecoverable error (bit 5) occurs, turn off the power as soon as
possible.
5-70
Decimal Function
0 Not used. Fixed to Off.
0 Not used. Fixed to Off.
0 Drawer kick-out connector pin 3 is LOW.
4 Drawer kick-out connector pin 3 is HIGH.
0 On-line.
8 Off-line.
16 Not used. Fixed to On.
0 Cover is close
32 Cover is open
0 Paper is not being fed by the paper feed button.
64 Paper is being fed by the paper feed button.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to Off.
0 Not used. Fixed to Off.
0 No mechanical error.
4 Mechanical error.
0 No auto cutter error.
8 Auto cutter error occurred.
0 Not used. Fixed to Off.
0 No unrecoverable error.
32 Unrecoverable error.
0 No automatically recoverable error.
64 Automatically recoverable error occurred.
0 Not used. Fixed to Off.
Third byte (paper sensor information)
Bit Off/On Hex Decimal Function
Off 00 0 Paper near end sensor: paper adequate.
0,1
On 03 3 Paper near end sensor: paper near end.
Off 00 0 Paper end sensor: paper present.
2,3
On 0C 12 Paper end sensor: no paper present.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 Not used. Fixed to Off.
6 Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Not used. Fixed to Off.
- Some paper sensors are not present, depending on the printer model.
The names of some paper sensors are different, depending on
the printer model.
Fourth byte(paper sensor information)
Bit Off/On Hex Decimal Function
0 On 01 1 Not used. Fixed to On.
1 On 02 2 Not used. Fixed to On.
2 On 04 4 Not used. Fixed to On.
3 On 08 8 Not used. Fixed to On.
4 Off 00 0 Not used. Fixed to Off.
5 Off 00 0 Not used. Fixed to Off.
6 Off 00 0 Not used. Fixed to Off.
7 Off 00 0 Not used. Fixed to Off.
5-71