Samsung SRP-275 Operator's Manual page 108

CHAPTER 5
CONTROL COMMANDS LIST
GS * n1 n2 [d] n1xn2x8
[Name] Defining the download bit image
[Format] ASCII GS
Hex 1D
1 ≤ n1 ≤ 45
[Range]
0 ≤ n2 ≤ 24
Note) Take care that the number of data (n1 x n2 x 8) is equal to or smaller
than 2,048.
[Description] This command defines the download bit image having the dots specified n1
and n2. The number of horizontal dots is represented by n1 8 and that of
vertical dots is represented by n2 x 8, respectively. m denotes the number to
be registered. (See a download bit image printout.) d denotes the bit image
data. Once the download bit image is defined, it remains valid until it is
redefined or the download deletion command (ESC DC2 n1 n2) is executed.
5-142
* n1 n2 m [d] n1xn2x8
2A n1 n2 m [d] n1xn2x8
GS / m
[Name] Printing the download bit image
[Format] ASCII GS / m
Hex 1D 2F m
0 ≤ m ≤ 255
[Range]
[Description] This command prints the bit image saved in the number specified with m.
[Notes] If the print buffer contains the data, this command will be ignored. If the bit
image has not been saved in the specified number, this command will be
ignored. Nothing is printed when m is other
5-143