Samsung SRP-275 Operator's Manual page 103

CHAPTER 5
CONTROL COMMANDS LIST
ESC 3
[Name] Specifying the standard line feed width
[Format] ASCII ESC
Hex 1B
[Description] This command sets the line feed width as follows.
Character type : 1/6 inch
Graphic type : 2/9 inch
ESC C n
[Name] Setting the page length
[Format] ASCII ESC
Hex 1B
1 ≤ n ≤ 127
[Range]
[Description] Sets the 1-page length to n-lines.
ESC N n
[Name] Specifying the perforation skip
[Format] ASCII ESC
Hex 1B
1 ≤ n ≤ 126
[Range]
[Description] This command feeds (skips) the lines specified with n without printing.
However, you cannot specify beyond the length of one page.
5-132
3
33
C n
43 n
N n
4E n
ESC O
[Name] Canceling the perforation skip
[Format] ASCII ESC O
Hex 1B 4F
[Description] This command cancels perforation skipping operation.
ESC C n
[Name] Setting the page length
[Format] ASCII ESC C
Hex 1B 43
14 ≤ n ≤ 120
[Range]
[Description] Sets the 1-page length to n-lines.
Also it initiates a paging operation, with 3 space lines placed at the beginning
and end of a page.
(The first 3-line spacing is initiated when this command is verified.)
[Notes]
- If an out-of-range value is specified for "n", it is set to 66.
- The actual number of printable lines is "n-6".
[Default] n = 66
ESC f <1>
[Name] Form feed (Changing the page)
[Format] ASCII ESC f
Hex 1B 66
[Description] This command searches for the beginning of the next page after printing the
data in the print buffer.
n
n
n
n
<1>
01
5-133