Rack Mounting Of Ups, Ebm, And Accessory Modules - Lenovo RT8.0kVA Installation And User Manual

3. Remove the three screws to pull out the metal protection cover of the battery
4. Pull out the plastic handle of the left and right battery packs, and slide the
5. Mount the EBM in the rack.
6. Put back the battery packs, screw back the metal protection cover and the front

Rack mounting of UPS, EBM, and accessory modules

Procedure
Follow steps 1 to 4 in "Preparing the EBM for rack mounting" on page 21 for
module mounting on the rails.
22
Installation and User's Guide
pack.
packs out slowly on to a flat and stable surface. Use two hands to support the
battery packs. Set them aside for reinstalling after that the EBM is rack
mounted.
panel, then clip the center cover.