Table of Contents
Advertisement
Submenu
On/Off settings
Sleep mode
(continued)
Remote command
Bypass standby
Available settings
Default settings
[Enabled] [Disabled]
[Enabled]
If Disabled, LCD and
communication will
turn OFF
immediately after
UPS is OFF.
If Enabled, LCD and
communication stays
ON 90 minutes after
UPS is OFF.
[Enabled] [Disabled]
[Enabled]
If Enabled, shutdown
or restart commands
from software are
authorized.
[Enabled] [Disabled]
[Enabled] for 8PX
Define if output is
and 9PX models
powered from Bypass
[Disabled] for 8KX
in Standby mode.
and 9KX models
Chapter 2. Presentation
13
Advertisement
Table of Contents
