Step 4. Pull out the plastic handle of the battery pack, and slide the packs out slowly on to a flat and stable
surface. Use two hands to support the battery packs. Set them aside for reinstalling after that
the UPS is rack mounted.
Step 5. Mount the UPS on rack.
Step 6. Put back the battery packs, screw back the metal protection cover and the front panel, then
clip the center cover.
Rack mounting of the UPS and EBM
The UPS and connected EBMs must be installed no higher than 5 feet (1.5m) above the floor to allow for
easy installation and servicing.
Step 1.
Follow steps 1 to 4 in the illustration for module mounting on the rails.
19
.
Chapter 3
Installation