Table of Contents
Advertisement
12
Installation and User's Guide
Submenu
On/Off settings
Cold start
Forced reboot
Auto restart
Auto start
Energy saving
Available settings
Default settings
[Enabled] [Disabled]
[Enabled]
Authorize the
product to start on
battery power.
[Enabled] [Disabled]
[Enabled]
If utility power
recovers during a
shutdown sequence:
If Enabled, the
shutdown sequence
will complete and
wait 10 seconds prior
to restart. If Disabled,
the shutdown
sequence will not
complete and restart
will occur
immediately.
[Enabled] [Disabled]
[Enabled]
Authorize the
product to restart
automatically when
utility power
recovers after a
complete battery
discharge.
[Enabled] [Disabled]
[Disabled]
The UPS
automatically starts
up as soon as utility
power is available
(no need to press the
button).
[Disabled] [100W] ...
[Disabled]
[1000W]
If Enabled, UPS will
shut down after 5
minutes of back-up
time, if load is less
than threshold.
Advertisement
Table of Contents
