10. Remove the Input Bypass AC jumper
.
11. Punch the Bypass AC Source knockout of the MBP I/O cover
and insert a
provided cable gland inside.
12. Insert the Normal AC source cable through the cable gland.
13. Connect the wires to the Normal AC source (Input) terminal blocks.
14. Insert the Bypass AC source cable through the cable gland.
15. Connect the wires to the Bypass AC source (Input BP) terminal blocks.
16. Insert the Output cable through the cable gland.
17. Connect the wires to the Output terminal blocks.
18. Tighten the cable glands.
19. Slide back and secure the MBP I/O cover
with the 5 screws.
36
Installation and User's Guide