2. Connect the MBP detection cable
3. Slide the MBP I/O cover
4. Insert the Normal AC source cable through the cable gland.
5. Connect the wires to the Normal AC source (Input) terminal blocks (do not
6. Insert the Output cable through the cable gland.
7. Connect the wires to the Output terminal blocks.
8. Tighten the cable glands.
9. Slide back and secure the MBP I/O cover
8/11k VA 3Phase with separate Normal and Bypass AC source
Procedure
34
Installation and User's Guide
terminal blocks.
remove the Input Bypass AC jumper
inside the UPS I/O cover.
1. Slide the MBP Bypass Input cover
2. Punch the UPS Bypass Input knockout of the MBP Bypass Input cover
insert a provided cable gland inside.
to the specific UPS connector.
after removing the 5 screws, to access to MBP
and the UPS Input Bypass jumper
with the 5 screws.
after removing the 3 screws.
and