Re-Assembly - Cisco TelePresence MX800 Single Replacement Manual

Cisco TelePresence MX800 Single
Contents
Replace the PoE injector
Step 2: Remove the PoE injector

Re-assembly:

In order to install the new PoE injector, follow all the steps in reverse order.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 2 of 2)
Disconnect cables:
2a
1 × Power (top)
2 × RJ45 for Ethernet
and Touch 10 user
interface (bottom).
Speakers and cameras
Remove screws and
2b
washers.
2 × M3x8 (pan),
Torx T10
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
32
Replacement Guide
Codec and monitor Codec and monitor Appendix
Remove PoE injector.
2c