Cisco TelePresence MX800 Single Replacement Manual page 36

Cisco TelePresence MX800 Single
Contents
Replace the monitor (mounted on a stand)
Step 6: Lift off the monitor
Before moving the monitor
Plan ahead where to put down the
monitor. Ideally, place it in the original
shipping packaging.
The monitor is heavy
4
We recommend four people
working together to replace the
90 kg / 200 lb
monitor. Two people should lift
the monitor using the handles as
described below; the other people
must help stabilizing the monitor.
Use lifting handles
To avoid trapping your fingers, use the lifting
handles at the bottom of the monitor.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 4 of 5)
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
36
Replacement Guide
Codec and monitor Codec and monitor Appendix
Rear view
Rear view
Loosen the wing nuts on
6a
both sides.
They are accessed from
the sides of the monitor.
Lift up the monitor and
6b
place it in the original
shipping packaging.