Re-Assembly - Cisco TelePresence MX800 Single Replacement Manual

Cisco TelePresence MX800 Single
Contents
Replace the dual camera module
Step 7: Pull out camera module
Gently pull out the camera module.
Do not touch the lens.
Do not apply stress or strain to the
camera module.

Re-assembly:

In order to install the new camera module, follow all the
steps in reversed order.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction Grilles and covers
(page 7 of 7)
Speakers and cameras Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
25
Replacement Guide
Codec and monitor Appendix