Cisco TelePresence MX800 Single
Contents
Replace the single camera module
Step 6: Pull out camera module
Gently pull out the camera module.
Do not touch the lens.
Do not apply stress or strain to the
camera module.
Re-assembly:
In order to install the new camera module,
follow all the steps in reversed order.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
Introduction
Grilles and covers
(page 6 of 6)
Speakers and cameras
Speakers and cameras
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
18
Replacement Guide
Codec and monitor
Appendix