Cisco TelePresence MX800 Single
Replacement Guide
Contents
Introduction
Grilles and covers
Speakers and cameras
Codec and monitor
Codec and monitor
Appendix
Replace the codec
(page 2 of 4)
Step 2: Disconnect all cables from codec
Make sure to remember the position of the cables.
For reconnecting the cables, refer to cabling details
in the Cable schema and Spare part list on our web
site. Go to
http://www.cisco.com/go/mx-docs
and
select Maintain and Operate Guides.
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
28