Camera Physical Description - HIKVISION DS-2CD7153-E Installation Manual

Installation Manual of Network Mini Dome Camera

2.1.1 Camera Physical Description

Serial NO.
1
2
3
4
5
6
7
When the network is connected, the "S" LED turns orange, while the "L" LED flickers in green.
8
NOTE:
When the camera is power up, press the "RESET" button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
P: Power LED indicator, which turns red when power is applied to the unit.
Bottom board set screw hole
S & L: Network status LED indicator.
RESET: Reset all paramaters to factory default settings.
Description
Back box
Lens
Bottom board
Lens set screw
3