Cisco Ip Phone 7811, 7821, 7841, And 7861 User Guide For Cisco Unified Communications Manager 10.0 (Sip - Cisco 7811 User Manual

Getting Started
7 Navigation ring and
Select button
8 Programmable feature
buttons
9 Headset button
10 Speakerphone button
11 Keypad
12 Mute button
13
Volume button
The Navigation and Select button allows you to scroll through menus,
highlight items and select the highlighted item.
Depending on how your system administrator sets up the phone,
programmable feature buttons provide access to:
Buttons illuminate to indicate status:
Toggles the headset on or off. When the headset is on, the button is lit.
Toggles the speakerphone on or off. When the speakerphone is on, the button
is lit.
Allows you to dial phone numbers, enter letters, and select menu items (by
entering the item number).
Toggles the microphone on or off. When the microphone is muted, the button
is lit.
Controls the handset, headset, and speakerphone volume (off hook) and the
ringer volume (on hook).

Cisco IP Phone 7811, 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP)

• Phone lines and intercom lines
• Speed-dial numbers (speed-dial buttons, including the Line Status
speed-dial features)
• Web-based services (for example, a Personal Address Book button)
• Call features (for example, a Privacy button)
• Green, steady: Active call or two-way intercom call
• Green, flashing: Held call
• Amber, steady: Privacy in use, one-way intercom call, DND active,
or logged into Hunt Group
• Amber, flashing: Incoming call or reverting call
• Red, steady: Remote line in use (shared line or Line Status)
• Red, flashing: Remote line on hold
Buttons and Hardware
17