Figure 6-35: Voice - Regional Screen - Miscellaneous - Linksys SPA9000 User Manual

IP Telephony System
Prefer G726r32 Code. This is the dialing code that will make this codec the preferred codec for the associated
call. The default is *0172632.
Force G726r32 Code. This is the dialing code that will make this codec the only codec that can be used for the
associated call. The default is *0272632.
Prefer G726r40 Code. This is the dialing code that will make this codec the preferred codec for the associated
call. The default is *0172640.
Force G726r40 Code. This is the dialing code that will make this codec the only codec that can be used for the
associated call. The default is *0272640.
Prefer G729a Code. This is the dialing code that will make this codec the preferred codec for the associated call.
The default is *01729.
Force G729a Code. This is the dialing code that will make this codec the only codec that can be used for the
associated call. The default is *02729.
Miscellaneous
Set Local Date (mm/dd). Set the local date (mm stands for months and dd stands for days). The year is optional
and uses two or four digits.
Set Local Time (hh/mm). Set the local time (hh stands for hours and mm stands for minutes). Seconds are
optional.

Figure 6-35: Voice - Regional Screen - Miscellaneous

Time Zone. For caller ID generation, select the number of hours to add to GMT to generate the local time. The
default is GMT-08:00.
FXS Port Impedance. This sets the electrical impedance of the FXS port. Select one of these choices: 600, 900,
600+2.16uF, 900+2.16uF, 270+750||150nF, 220+850||120nF, 220+820||115nF, or 370+620||310nF. The
default is 600.
Daylight Saving Time Rule. Enter the rule for calculating daylight saving time; it should include the start, end,
and save values. This rule is comprised of three fields. Each field is separated by ; (a semicolon) as shown below.
Optional values inside [ ] (the brackets) are assumed to be 0 if they are not specified. Midnight is represented by
0:0:0 of the given date.
This is the format of the rule: Start = <start-time>; end=<end-time>; save = <save-time>
The <start-time> and <end-time> values specify the start and end dates and times of daylight saving time. Each
value is in this format: <month> /<day> / <weekday>[/HH:[mm[:ss]]]
Chapter 6: Using the Web-based Utility 56
The Voice Tab
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560