IP Telephony System
Interactive Voice Response Menu
Action
Command
(press these
keys on the
telephone)
Set Primary DNS
161
Server IP Address
Set the Mode
201
Configure
72255
Auto-Attendant
Messages
Enable/Disable WAN
7932
Access to the
Web-based Utility
Manual Reboot
732668
Factory Reset
73738
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Choices
Description
Enter the IP address
First, set the Internet Connection Type
using numbers on the
to static IP address; otherwise, you
telephone keypad. Use
will hear, "Invalid Option," if you try to
the * (star) key when
set the IP address of the primary DNS
entering a decimal point.
server.
Press 0 to select the
Use the router/NAT mode when the
router/NAT mode.
Internet phones are on the Local Area
Press 1 to select the
Network (LAN) side.
bridge/switch mode.
Use the bridge/switch mode when the
Internet phones are on the Wide Area
Network (WAN) side.
Refer to the "Configuring the
Auto-Attendant Messages" section at
the end of this chapter.
Press 1 to enable.
Use this setting to enable or disable
Press 0 to disable.
WAN access to the Web-based Utility.
(This Utility lets you configure the
System.)
After you hear, "Option successful,"
hang up the phone. The System will
automatically reboot.
Press 1 to confirm.
If necessary, enter the password. The
Press * (star) to cancel.
System will request confirmation;
enter 1 to confirm. You will hear,
"Option successful." Hang up the
phone. The System will reboot, and all
settings will be reset to their factory
default settings.
NOTE: This feature may be protected by a
password available only from your ITSP.
If you need to enter a password, refer to the
following section, "Entering a Password."
17