Page 1
INSTALLATION GUIDE Linksys SPA 2102 ATA Installation Guide For analog phone or fax extensions To configure and activate your Linksys SPA 2102 ATA, please have your phone system administrator follow these steps: Configure Extensions To get started, check to see if your extension(s) need to be configured.
Page 2
INSTALLATION GUIDE Linksys SPA 2102 ATA Configure Extension Settings 1. You can select the following features and information for the extension. Once done, click Next. Note: You can always modify these settings later on. 2. You will need to verify or provide your E911 address, and then click Continue.
Page 3
• The INTERNET port connects to your router or if you have no router, direct to your cable or DSL Broadband Modem. Note: If you connect directly to a broadband modem, you will first need to configure your Linksys ATA to act as a router. Please...
Use the activation code and simply follow the steps below for activation. Enter Your Activation Code 1. Make sure your Linksys 2102 ATA is connected to the Internet, and that a regular telephone or a fax machine with a telephone is attached to the Phone 1 port.
Page 5
If you do not have a router, you can connect your Broadband modem directly into your Linksys ATA and then configure it to act as a router. Please follow the instructions below to configure it: Configure Linksys ATA 1.
Page 6
ROUTER mode. 4. Your ATA Internet port can be connected directly to a broadband modem and the Linksys SPA 2102 can be used as an ATA for your phone, and as a router for your PC or laptop when plugged directly into the Ethernet port of the ATA.
Page 7
INSTALLATION GUIDE Linksys SPA 2102 ATA Reference Section: Indicator Lights The status of your adapter can be determined by looking at the indicator lights on the front panel. Power Green. The Power LED lights up when the phone adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet.