Panel Explanation - Draytek Vigor2960 Series Quick Start Quide

1 . 1 P a n e l E x p
1 . 1 P a n e l E x p
LED
ACT (Activity)
CSM
VPN
DoS
WAN1/2
QoS
USB1/2
LED on Connector
GigaWAN 1/2
GigaLAN
1/2/3/4
Vigor2960 Series Quick Start Guide
l a n a t i o n
l a n a t i o n
Status
Blinking
Off
On
On
Off
On
Blinking
On
Blinking
On
Off
On
Blinking
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Left LED On
(Green)
Off
Blinking
Right LED On
(Green)
Off
Explanation
The router is powered on and running
normally.
The router is powered off.
The profile(s) of CSM (Content Security
Management) for IM/P2P, URL/Web Content
Filter application can be enabled from
Firewall >>General Setup. (Such profile
must be established under CSM menu).
The VPN tunnel is active.
No VPN tunnel is active.
The DoS/DDoS function is active.
It will blink while deleting an attack.
The WAN1 or WAN2 connection is ready.
It will blink while transmitting data.
The QoS function is active.
The QoS function is disabled.
The USB device is connected and ready for
use.
The data is transmitting.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
2