Panel Explanation; For Vigor2860 - Draytek Vigor2860 series Quick Start Manual

1 . 1 P a n e l E x
1 . 1 P a n e l E x
1 . 1 . 1 F o r V i g
1 . 1 . 1 F o r V i g
LED
ACT (Activity)
USB1~2
WAN2
DSL
VPN
QoS
WCF
DoS
LED on Connector
Left
WAN2
LED
(Giga)
Right
LED
Left
GigaLAN
LED
1~6
Right
LED
Vigor2860 Series Quick Start Guide
p l a n a t i o n
p l a n a t i o n
o r 2 8 6 0
o r 2 8 6 0
Status Explanation
Blinking The router is powered on and running
normally.
Off The router is powered off.
On USB device is connected and ready for use.
Blinking The data is transmitting.
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The router is ready to access Internet
through DSL link.
Blinking Slowly: The DSL connection is ready.
Quickly: The connection is training.
On The VPN tunnel is active.
On The QoS function is active.
On The Web Content Filter is active. (It is
enabled from Firewall >> General
Setup).
On The DoS/DDoS function is active.
Blinking It will blink while detecting an attack.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps
2