Panel Explanation; For Vigor2830 - Draytek Vigor2830 Series Quick Start Manual

1 . 1 P a n e l E x p
1 . 1 P a n e l E x p
1 . 1 . 1 F o r V i g o
1 . 1 . 1 F o r V i g o
LED
ACT (Activity)
USB
CSM
WCF
DSL
WAN2
DoS
VPN
QoS
LED on Connector
Left LED
GigaLAN
(Green)
1/2/3/4
Right LED
(Green)
Left LED
WAN2
(Green)
(Giga)
Right LED
(Green)
Vigor2830 Series Quick Start Guide
l a n a t i o n
l a n a t i o n
r 2 8 3 0
r 2 8 3 0
Status
Blinking
Off
On
Blinking
On
On
On
Blinking
On
Blinking
On
Blinking
On
On
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
Explanation
The router is powered on and running normally.
The router is powered off.
USB device is connected and ready for use.
The data is transmitting.
The profile(s) of CSM (Content Security Management)
for IM/P2P, URL/Web Content Filter application can be
enabled from Firewall >>General Setup. (Such profile
must be established under CSM menu).
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
The router is ready to access Internet through DSL link.
Slowly: The DSL connection is ready.
Quickly: The connection is training.
The WAN2 connection is ready.
It will blink while transmitting data.
The DoS/DDoS function is active.
It will blink while detecting an attack.
The VPN tunnel is active.
The QoS function is active.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected with 10/100Mbps when left
LED is on.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is disconnected with 10/100Mbps when left
LED is on.
2