Panel Explanation - Draytek Vigor2866 Series Quick Start Manual

2. P anel Explanation
2. P anel Explanation
2.1 Vigo r 2865FVac/Vigor286
2.1 Vigo r 2865FVac/Vigor286
LED
ACT
WAN2
QoS
USB
DSL
Phone1/2
2.4G/5G
LED on Connector
Left
WAN2
LED
/ P6
Right
6F
6F
Status Explanation
Off The router is powered off.
Blinking The router is powered on and running
normally.
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The QoS function is active.
Off The QoS function is inactive.
On USB device is connected and ready for use.
Off No USB device is connected.
Blinking The data is transmitting.
On The router is ready to access Internet
through DSL link.
Blinking Slowly: The DSL connection is ready.
Quickly: The connection is training.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Blinking A phone call comes.
2.4G/5G: Wireless access point with
On
bandwidth of 2.4GHz/5GHz is ready.
WLAN: Wireless access point is ready.
Off Wireless function is disabled.
It will blink slowly while wireless traffic goes
Blinking
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
2
Vac
Vac