Panel Explanation; Vigor2865L - Draytek Vigor2865 Series Quick Start Manual

2 . P a n e l E
2 . P a n e l E
2 . 1 V i g o r 2
2 . 1 V i g o r 2
LED
ACT
WAN2
QoS
LTE
DSL
WCF
USB
VPN
DMZ
LED on Connector
Left
WAN2
LED
/ P6
x p l a n a t i o
x p l a n a t i o
8 6 5 L
8 6 5 L
Status
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
On
Off
Blinking
n
n
Explanation
The router is powered off.
The router is powered on and running
normally.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The QoS function is active.
The QoS function is inactive.
LTE device is connected and ready for use.
LTE device is not detected, or has serious
problem (e.g., no SIM card, SIM pin error, SIM
deactivated, and etc.).
Slowly: LTE device is in dialing up.
Quickly: The data is transmitting.
The router is ready to access Internet through
DSL link.
Slowly: The DSL connection is ready.
Quickly: The connection is training.
The Web Content Filter is active. (It is enabled
from Firewall >> General Setup).
WCF is disabled.
USB device is connected and ready for use.
No USB device is connected.
The data is transmitting.
The VPN tunnel is active.
VPN services are disabled
Traffic is passing through VPN tunnel.
The DMZ function is enabled.
The DMZ function is disabled.
The data is transmitting.
The port is connected.
The port is disconnected.
The data is transmitting.
2