Power Sources; Jump Boost Another Device - NETGEAR BigPond Wi-Fi 4G Advanced II AirCard 790S User Manual

Power Sources

Your hotspot can receive power from any of the following sources:
• Rechargeable battery included with the hotspot
For more information, see
• Wall socket using the AC adapter and USB cable
For more information, see
• USB port on your computer
For more information, see

jump Boost Another Device

You can give a boost to your smartphone if it is low or out of battery power by connecting it to
the hotspot's jump boost cable and starting boost from the touchscreen screen or the hotspot
web page.
Figure 3. Jump boost cable
Note: You cannot charge the hotspot while it is boosting another device.

To start the jump boost of another device from the touchscreen:
1. Plug the jump boost cable into your hotspot.
2. Plug the device you want to charge into the other end of the jump boost cable.
On the Home screen, a pop-up window appears with boost options. If the pop-up window
does not display, tap Settings > Jump Boost.
BigPond Wi-Fi 4G Advanced II
Install the Battery on page 13.
Recharge the Battery
Recharge the Battery
Get Started
11
on page 56.
on page 56.