•
Make sure that your micro SIM account is active. To check micro SIM status and activate
the account, visit
•
If you use a pay-as-you-go micro SIM card, make sure that the account has a positive
balance.
•
If your mobile hotspot still does not connect, you might need to create or update the
default connection profile.
To check the default connection profile settings:
1.
From a computer or wireless device that is connected to your network, launch an
Internet browser.
2.
Enter http://m.home or http://10.0.0.138.
A login screen displays.
3.
Enter the mobile hotspot password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4.
Select Settings > Network > APN.
5.
Review ISP settings.
Reset the hotspot
You can reset the hotspot to the factory settings. This is useful if you forgot your admin login
password for the hotspot web page.
If you reset the hotspot, all of your customizations are lost. If you want to keep them, save
them before doing the reset and restore them afterward. See
Settings
on page 74.
Note:
When you reset the hotspot, any currently connected devices lose
access and must be reconnected after the hotspot restarts.
BigPond Wi-Fi 4G Advanced II
http://m.telstra.com.
Troubleshooting
100
Back Up and Restore Hotspot