NETGEAR BigPond Wi-Fi 4G Advanced II AirCard 790S User Manual page 84

4. Select Settings > Network > APN.
5. Click the Add button.
6. Enter the name of the network service provider and the APN that you obtained from it.
7. Enter the user name and password, if they are required for the wireless network.
8. Select the network authentication mode:
• None
• PAP
• CHAP
• PAP or CHAP
9. Change the PDP (data protocol), if necessary:
• IPV4
• IPV6
• IPV4V6
10. Change the PDP roaming protocol, if necessary:
• None
• IPV4
• IPV6
• IPV4V6
Note: PDP roaming protocol is the IP protocol used while you are roaming
(for example when you are traveling and the roaming network does
not support IPv6).
11. Click the + symbol next to the new APN entry.
The entry is added to the table.
BigPond Wi-Fi 4G Advanced II
Advanced Settings
84