Enable Ip Passthrough Mode - NETGEAR BigPond Wi-Fi 4G Advanced II AirCard 790S User Manual

Enable IP Passthrough Mode

To turn off the hotspot router functionality and assign the network IP address directly to the
attached device, enable IP passthrough.
If you make this change, the attached device restarts using a different driver configuration.
WARNING:
If you enable this feature, Wi-Fi is disabled and you must use a USB
cable to tether the device.
Note: This feature is available to Windows computer users. If you are a Mac
user, do not enable this option because you will be unable to access
your device.

To enable IP passthrough mode:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://m.home or http://10.0.0.138.
A login screen displays.
3. Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
BigPond Wi-Fi 4G Advanced II
Advanced Settings
81