Prisma Ii Xd Chassis Style - Cisco Prisma II EDR Installation Manual

Chapter 2 System Installation

Prisma II XD Chassis Style

The Prisma II XD chassis back panel serves as both a connector panel and a
receptacle for AC power supply modules and the ICIM2-XD, when installed.
The RF connectors are arranged in pairs, and each pair is numbered to identify its
corresponding module slot. The Port A connector in each pair is identified by a black
retaining nut and a black circle in the panel artwork, while the Port B connector is
unmarked. The Port A and Port B connectors correspond to the upper and lower
connectors, respectively, on the chassis midplane.
22 OL-32414-01