Camera Physical Description - HIKVISION DS-2CD7133-E Installation Manual

Installation Manual of Network Mini Dome Camera

2.1.1 Camera Physical Description

Serial NO.
1
2
3 P: Power LED indicator, which turns red when power is applied to the unit.
4
5
6
7
When the network is connected, the "S" LED turns orange, while the "L" LED flickers in
8
NOTE:
When the camera is power up, press the "RESET" button for about 10 seconds, then all parameters,
including user name, password, IP address, port number, etc., will be reset to the factory default
settings.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Description
Back box
Bottom board
Bottom board set screw hole
Lens set screw
S & L: Network status LED indicator.
green.
RESET: Reset all paramaters to factory default settings.
Lens
4