Set Up An Ipv6 Pass-Through Connection; Set Up An Ipv6 Fixed Connection - NETGEAR N150 D500 User Manual

10. (Optional) Change the NAT filtering mode:
• Secured. In secured mode, the modem router inspects both TCP and UDP packets.
• Open. In open mode, the modem router inspects UDP packets only. This is the
default mode.
11. Click the Apply button.
Your settings are saved.

Set Up an IPv6 Pass-Through Connection

In IPv6 pass-through mode, the modem router works as a Layer 2 Ethernet switch with two
ports (LAN and WAN Ethernet ports) for IPv6 packets. The modem router does not process
any IPv6 header packets.
Note: Follow the directions that your IPv6 ISP gave you.

To set up an IPv6 pass-through Internet connection:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
6. From the Internet Connection Type menu, select Pass Through.
The screen adjusts, but no additional fields display.
7. Click the Apply button.
Your settings are saved.

Set Up an IPv6 Fixed Connection

A fixed IPv6 connection is based on a static or fixed IPv6 address that your IPv6 ISP gave
you.
Note: Follow the directions that your IPv6 ISP gave you.
N150 and N300 WiFi DSL Modem Routers
Manage the Internet Settings Manually
39