NETGEAR N150 D500 User Manual page 21

The NETGEAR genie BASIC home screen displays.
12. Change the default connection method:
a. Select ADVANCED > Setup > WAN Setup.
b. From the WAN Preference menu, select Must use Ethernet WAN.
c. Click the Apply button.
The following message displays:
WAN physical interface changing. Please wait ...
You might need to wait a couple of minutes.
13. If the computer is disconnected from the modem router, reconnect the computer to the
modem router (see
a. In the address field of the web browser, enter www.routerlogin.net.
b. When prompted, enter admin for the user name and password for the password.
The NETGEAR genie BASIC home screen displays again.
14. Select ADVANCED > Setup Wizard.
The Setup Wizard start screen displays.
Install and Access the Modem Router and Its Network
N150 and N300 WiFi DSL Modem Routers
Step 8), relaunch the web browser, and access NETGEAR genie again:
21