NETGEAR JNR1010v2 Installation

Installation
N150 and N300 Wireless Routers

Package Contents

Power adapter
(varies by region)
Router
(product appearance
Ethernet cable
varies by model)
(only available for
some models)
Front and Back Panels
Note: Product appearance varies by model.
Power LED Ethernet LEDs 1–4 Ethernet ports 1–4
Internet LED WiFi LED
1. Prepare your modem.
Unplug your modem's power. If it has a
battery backup, remove the battery.
Internet
4. Connect a computer.
Use an Ethernet cable to connect your
computer to the Ethernet port on the
router.
You can also use WiFi to connect.
WPS/Reset
To connect with WiFi, use the WiFi
button
network name and password on the
Internet port Power
product label.
connector
2. Connect your modem.
Plug in your modem. Put the battery
back in. Then cable the modem to the
router's Internet port.
Ethernet cable
DSL or cable
(only available for
some models)
Modem
3. Power on the router.
Connect the power adapter to the
router and plug the power adapter into
an electrical outlet.
The Power LED lights green.
Wait for the WiFi LED
green.
Power
adapter
Ethernet cable
(not included)
5. Log in to the router.
Launch a web browser.
NETGEAR genie displays.
If you do not see genie, enter
www.routerlogin.net in the address
field of the web browser . When
prompted, enter admin for the user
name and password for the password.
to light