Troubleshoot with the LEDs
When you turn on the power, the LEDs light as described here.
1.
When power is first applied, the Internet LED
and then turns off.
2.
For about 6 seconds, no LEDs light.
3.
Both LAN LEDs (1 and 2)
4.
After approximately 17 seconds after turning on the power, the following occurs:
-
The WiFi LED
-
The LAN port LEDs (1, 2, or both)
-
The DSL LED
possible speed on the DSL line. If the negotiation completes and a DSL link is
established, the LED turns solid green. If you do not use a DSL modem but a cable or
fiber modem, the LED remains blinking.
-
The Power LED
-
The Internet LED
Power LED Is Off
If the Power LED
following:
•
Check that the Power On/Off button on the back is in the on position, that is, it is pushed
in.
•
Check that the power cord is correctly connected to your modem router and that the
power supply adapter is correctly connected to a functioning power outlet.
•
Check that you are using the 12 VDC 0.5A power adapter that NETGEAR supplied for
this product.
If the error persists, a hardware problem might exist. For recovery instructions or help with a
hardware problem, contact technical support at
WiFi LED Is Off
If the WiFi LED
Manage the WiFi Radio
lights solid green.
N150 and N300 WiFi DSL Modem Routers
light for about 1 second.
lights green.
blinks green to indicate that the modem router negotiates the best
lights solid green.
lights solid green if an Internet connection is established.
and other LEDs are off when your modem router is turned on, do the
stays off, check to see if the radio on the modem router is turned off (see
on page 56). By default, the radio is turned on and the WiFi LED
Troubleshooting
lights solid green for about 5 seconds
light green for any local ports that are connected.
www.netgear.com/support.
102