Specify An Internet Connection That Uses A Login And Pppoa Service - NETGEAR N150 D500 User Manual

Field
Use This MAC Address
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is
enabled by default because it is needed in most situations. To specify the NAT setting, select one of the
following radio buttons:
• Enable. NAT is enabled. This is the default setting.
• Disable. NAT is disabled.
9. Click the Apply button.
Your settings are saved.
10. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
Internet Connection
Specify an Internet Connection That Uses a Login and PPPoA
Service
If you want to manually configure the Internet connection settings, use the information that
your ISP gave you to log in to your Internet service. If you cannot find this information, contact
your ISP.
Note: PPP over ATM (PPPoA) is available only if you connect the modem
router to the Internet over a DSL service. PPPoA is not available for cable
or fiber service.

To view or specify the Internet connection settings with a login for PPPoA service:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select Internet.
The Internet Setup screen displays.
N150 and N300 WiFi DSL Modem Routers
Description
Enter the MAC address that you want to use.
on page 104.
Manage the Internet Settings Manually
34
Troubleshoot the