To Disable The User Password Using Icim - Cisco Prisma II Installation And Operation Manual

When Change Psw /Shift Off appears, press the
4
and then enter the eight digits of your new password, using the 0-9 number keys.
If at any time you input a digit that is incorrect or wish to change a digit, use the
CAN (Cancel) function by pressing the
5 Press the
Results:
 The ICIM updates the display to show if your password entry was accepted
or rejected.

If the entry was accepted, you are able to return to the MAIN menu.
6 If the new password you entered is rejected, press the
password entry menu. Clear all digits using the CAN (Cancel) function, then re-
enter an 8-digit password using only the 0-9 number keys. Press the
input the password.
I C I M
S h e l f
S l o t
U s e r P s w
S A P s w
C h a n g e P s w
D i s a b l e
P s w

To Disable the User Password using ICIM

If a user password has been entered, you may disable it at any time. However, the
current password must be active prior to disabling it. If the current password has
expired (more than 10 minutes have passed since your last keystroke), you must re-
enter the current password before disabling it.
1 Press the
2 Use the
3 Press the
4 Use the
5 Press the
78-4015908-01 Rev F
ENTER
key to input the new password.
I C I M
S h e l f 7
7
S l o t 1 5
1 5
C h a n g e P s w
S h i f t O f f
ICIM
key.

key to scroll down until Password is highlighted.
SEL
key.

key to scroll down until Disable Psw is highlighted.
SEL
key to select Disable Psw.
SHIFT
ALRM
key to delete that digit.
I C I M
S h e l f
S h e l f 7
S l o t
S l o t 1 5
C h a n g e P s w C h a n g e P s w
* * * * * * * * 8 7 6 5 4 3 2 1
S h i f t O n
S h i f t O n
ICIM Password
key to display Shift On,
SHIFT
key to return to the
ENTER
I C I M
7
1 5
TP014
key to
49